ABB US/U4.3

Description

Introduction

ABB US/U4.3 is a KNX System Components product from ABB for professional building-automation projects. It is identified by SKU US/U4.3 and belongs to the KNX System Components category on knxbazzar.com. Explore more ABB KNX products for professional building automation projects.

Based on the available product data, ABB US/U4.3 is a flush mounted modular component supplied as a complete device. It is described for KNX (TP), has 4 inputs and 4 outputs, includes LED controlling as its sub-function, and is documented by ABB installation, operating, wiring, dimensional, technical, EPLAN, declaration, and compliance resources. Installers and system integrators can review our dealer and project support options.

Key Features

• Brand: ABB
• SKU / model: US/U4.3
• Category: KNX System Components
• Compatible bus system listed: KNX (TP)
• Number of inputs: 4; number of outputs: 4
• Number of input channels: 4; number of output channels: 4
• Sub-function: LED controlling
• Mounting type: flush mounted modular components

Benefits

• Clear project identification: the ABB brand and SKU US/U4.3 help consultants, buyers, and installers match the exact item in BOQs, quotations, and procurement lists.
• KNX project relevance: the product data identifies compatible bus system KNX (TP) and product range KNX.
• Defined I/O count: the available data lists 4 inputs, 4 outputs, 4 input channels, and 4 output channels.
• Flush mounted modular format: the mounting type is specified as flush mounted modular components, supporting accurate planning against the official ABB documentation.
• Documentation support: the product record references installation and operating instructions, wiring connection diagram, dimensional drawing, technical data, EPLAN data, environmental product declaration, RoHS information, REACH declaration, and CE & RoHS declaration of conformity.
• Procurement traceability: the product data includes the old replaced product ID GHQ6310070R0111 and E-Numbers for Finland, Norway, Sweden, and Switzerland, helping teams avoid substitution errors where those identifiers are used.

Technical Specifications

Specification	Value
V11.0	27143145

Applications

• Use in KNX building-automation project schedules where the exact ABB US/U4.3 SKU is specified.
• Suitable for procurement workflows that require matching a KNX System Components item against ABB official documentation and diagrams.
• Relevant for integrators and installers coordinating flush mounted KNX components within approved project documentation.
• Applicable to tender and BOQ review when 4 inputs, 4 outputs, and KNX (TP) are explicitly required by the project specification.

Installation Notes

• Verify the exact model ABB US/U4.3 and SKU US/U4.3 before ordering, especially when replacing or comparing against the old product ID GHQ6310070R0111.
• Use the official ABB installation and operating instructions, wiring connection diagram, dimensional drawing, and technical data sheet referenced in the product data before installation or commissioning.
• Confirm project requirements against the stated mounting type, dimensions, degree of protection, input/output channel counts, and KNX (TP) compatibility listed for this product.
• Do not substitute with a similar ABB item unless the BOQ, consultant approval, and official manufacturer documentation confirm equivalence.

Developer Resources

• Manufacturer product page: https://new.abb.com/products/2CDG110309R0011/us-u4-3
• Installation and Operating Instructions: referenced as PDF for US/Ux.3
• Wiring Diagram: referenced as Connection diagram Input EPS for US/U 4.3 diagram
• Technical Data Sheet / Technical Information: referenced as Technical Data PDF for US/U x.3
• Dimension Diagram: referenced as Dimensional Drawing EPS for US/U X.3 diagram
• Engineering EPLAN Data: referenced as EPLAN EDZ for US/U4.3
• Declaration of Conformity: referenced as CE & RoHS Declaration of Conformity PDF for US/Ux.3
• EU Data Act Compliance Declaration: referenced as EU Data Act Information Notice XLSX for KNX Building Automation Portfolio

FAQ

What is the SKU of this ABB product?

The SKU is US/U4.3.

Which bus system is listed for ABB US/U4.3?

The product data lists KNX (TP) as the compatible bus system.

How many inputs and outputs are listed for ABB US/U4.3?

The available product data lists 4 inputs and 4 outputs, with 4 input channels and 4 output channels.

What mounting type is stated for ABB US/U4.3?

The mounting type is listed as flush mounted modular components.

What should buyers verify before ordering?

Buyers should verify the exact ABB brand, model/SKU US/U4.3, BOQ line item, official ABB documentation, and project requirements to avoid ordering the wrong KNX component.

What is the exact product model?

The order/model code for this page is US/U4.3. Match it against project documents before purchase.

Conclusion

ABB US/U4.3 is a documented ABB KNX System Components item with KNX (TP), 4 inputs, 4 outputs, flush mounted modular component mounting, IP20 degree of protection, and referenced ABB technical and compliance documents.

For accurate B2B procurement, match the exact SKU US/U4.3 against the BOQ and official ABB resources before purchase or project substitution.