WEINZIERL KNX PowerSupply 365

Description

Introduction

The WEINZIERL KNX PowerSupply 365 is a compact 640 mA KNX bus power supply designed for DIN rail installation. With a width of only 4 modules, it provides the KNX line supply in a space-efficient format while integrating the bus choke directly into the device.

For installers and system integrators, the front-panel diagnostics are particularly useful during commissioning and service. Three multicolor LEDs indicate the operating condition of the device, including overload warning, exceeding temperature, telegram traffic and reset status. The unit also provides an auxiliary power output via a yellow/white connector.

For more KNX infrastructure products, browse the KNX system components category or view additional WEINZIERL products available from KNX Bazzar.

Key Features

• 640 mA KNX bus power supply
• Integrated bus choke
• Auxiliary power output
• Three multicolor front LEDs for device condition indication
• LED signalling for overload warning, exceeding temperature, telegram traffic and reset status
• Two buttons for resetting the KNX line
• DIN rail mounted device
• Compact width of 4 modules / 72 mm
• Plug for external power supply 230 V AC
• Yellow/white connector for auxiliary power output

Benefits

This power supply is well suited to KNX panels where reliable line supply, clear local diagnostics and cabinet space matter. The integrated bus choke reduces the need for a separate choke device, helping keep the installation layout clean and compact.

The multicolor LED indication gives installers immediate visual feedback during commissioning and troubleshooting. Overload warning, temperature status, telegram traffic and reset status can be checked directly at the device without additional information being required from the product data supplied.

The two reset buttons provide a direct method to reset the KNX line from the front of the device, supporting practical service work inside the panel.

Technical Specifications

Manufacturer	WEINZIERL
Product	KNX PowerSupply 365
Device type	KNX bus power supply
Bus supply current	640 mA
Bus choke	Integrated
Auxiliary power output	Provided
Status indication	Three multicolor LEDs on the front
LED indications	Overload with warning, exceeding temperature, telegram traffic and reset status
Reset control	Two buttons enable the KNX line to be reset
Mounting	DIN rail mounted device
Width	4 modules / 72 mm
External power supply connection	Plug for external power supply 230 V AC
Auxiliary output connector	Yellow/white connector

Applications

• KNX lines requiring a 640 mA bus power supply
• DIN rail installations where a compact 4-module footprint is required
• KNX panels where integrated bus choke functionality is preferred
• Installations that benefit from front-panel LED diagnostics for operating condition, telegram traffic and reset status
• Projects requiring an additional auxiliary power output from the KNX power supply device

Installation Notes

The device is intended for DIN rail mounting and occupies 4 modules, equivalent to 72 mm. Allow this width when planning the enclosure layout.

The manufacturer information specifies a plug for external power supply 230 V AC and a yellow/white connector for the auxiliary power output. The two front buttons are used to reset the KNX line, while the front LEDs provide indication of operating and diagnostic states.

For manufacturer product information, refer to the WEINZIERL KNX PowerSupply 365 page.

FAQ

What is the bus supply current of the KNX PowerSupply 365?

It is specified as a 640 mA KNX bus power supply.

Does the device include a bus choke?

Yes. The manufacturer states that the device has an integrated bus choke.

What do the front LEDs indicate?

The three multicolor LEDs indicate the condition of the device. They signal overload with warning, exceeding temperature, telegram traffic and reset status.

Can the KNX line be reset from the device?

Yes. Two buttons on the device enable the KNX line to be reset.

How wide is the device on the DIN rail?

The device is 4 modules wide, which corresponds to 72 mm.

Is an auxiliary power output available?

Yes. The device additionally provides an output for auxiliary power via a yellow/white connector.

Conclusion

The WEINZIERL KNX PowerSupply 365 combines 640 mA KNX bus supply, integrated choke functionality, auxiliary power output and clear front-panel diagnostics in a compact DIN rail device. For KNX integrators and panel builders, it offers a practical power supply option where space, service visibility and line reset access are important.