ABB MC-C1.1 Rolling Door Reed Contact (2CDG250006R0011)

Description

Introduction

The ABB MC-C1.1 (Product ID: 2CDG250006R0011, EAN: 4016779067300) is a surface-mounted opening detector designed for commercial and industrial entry points. Classified under ETIM 9 category EC001761 as an opening detector for danger detection systems, this reed contact is engineered primarily for ground-level installation on rolling, sliding, and tilting doors. This device is part of our Accessories range.

Built to perform in demanding environments, the contact housing features an IP67 degree of protection and a mechanically resilient construction. The internal circuit remains protected when rubber-tired vehicles pass over the housing, and signal lines are shielded via an integrated 4-wire cable enclosed within a plastic-coated metal hose.

Key Features

• Extended Product Type: MC-C1.1 (ABB Product ID: 2CDG250006R0011)
• GTIN / EAN: 4016779067300
• Ingress Protection: IP67 (Environmental Degree of Protection)
• Mounting Specification: Surface-mounted ground installation requiring a flat support surface
• Connection Details: 4-wire cable shielded by a plastic-coated metal hose
• Hardware Mandate: Requires anti-magnetic mounting screws for ground installation
• System Classifications: ETIM 9 EC001761, eClass V11.0: 27390312

Benefits

• Vehicle Drive-Over Protection: Features a mechanically stable contact housing engineered to protect internal circuits from damage when rubber-tired vehicles drive over it.
• IP67 Ingress Rating: Certified with an IP67 degree of protection to withstand harsh dust and water exposure at floor level.
• Armored Cable Shielding: Equips a 4-wire cable encased inside a plastic-coated metal hose for superior physical protection against wear.
• Flexible Door Compatibility: Supports reliable opening detection on rolling doors, sliding doors, and tilting doors.
• Zero-Battery Requirement: Operates as a hardwired contact requiring zero batteries and no manual operation mechanism.

Technical Specifications

Specification	Value
Extended Product Type:	MC-C1.1
Product ID:	2CDG250006R0011
Instructions and Manuals:	2CDG941218P0001
Number of Digital Inputs:	0
Manual Operation:	No
Number of Batteries:	0
Declaration of Conformity – CE:	2CDK513086D2701
WEEE Category:	Product Not in WEEE Scope
Declaration of Conformity – CE	2CDK513086D2701
EAN:	4016779067300
Catalog Description:	MC-C1.1 Rolling Door Reed Contact,Gr. 2
Degree of Protection:	IP67
WEEE B2C / B2B:	Business To Consumer
Environmental Degree of Protection	IP67
Degree of Protection	IP67
Classifications ETIM 9	EC001761 – Opening detector for danger detection system eClass: V11.0 : 27390312 WEEE Category: Product Not in WEEE Scope WEEE B2C / B2B: Business To Consumer
ETIM 9	EC001761 – Opening detector for danger detection system eClass: V11.0 : 27390312 WEEE Category: Product Not in WEEE Scope WEEE B2C / B2B: Business To Consumer
Long Description:	The reed contact for rolling doors is mounted mainly on rolling, sliding and tilting doors. The contact housing is mounted on the ground (a flat support surface is required). Only screws made of anti-magnetic material are allowed to be used for mounting. Due to the weatherproof and mechanically stable design of the contact housing, the circuit is largely protected against damage when rubber-tired vehicles drive over it. The 4-wire cable is protected by a plastic-coated metal hose.
Mounting Type:	Surface Mounted
Installation Instructions and Manuals	2CDG941218P0001 Mounting Type: Surface Mounted
Instructions and Manuals	2CDG941218P0001 Mounting Type: Surface Mounted
Data Sheet, Technical Information:	2CDC513083D0211
Voltage Range:	10 … 30 V DC
Power Loss:	0
Technical Data Sheet, Technical Information	2CDC513083D0211 Voltage Range: 10 … 30 V DC Power Loss: 0 W Number of Digital Inputs: 0 Manual Operation: No Color: grey Number of Batteries: 0

Applications

• Rolling Door Monitoring: Floor-level opening detection for industrial rolling doors subject to rubber-tired vehicle traffic.
• Sliding and Tilting Door Entry Points: Surface-mounted contact detection for commercial sliding and tilting door systems.

Installation Notes

• Ground Mounting Surface: Mount the contact housing directly on a flat ground support surface to ensure proper mechanical stability.
• Anti-Magnetic Fasteners Only: Strictly use mounting screws made from anti-magnetic material to secure the contact housing.
• Documentation Reference: Refer to official ABB Instructions and Manuals document 2CDG941218P0001 during installation.

Developer Resources

• Installation Instructions and Manuals: Document ID 2CDG941218P0001
• Declaration of Conformity – CE: Document ID 2CDK513086D2701

FAQ

What type of mounting hardware is required for the ABB MC-C1.1?

Only screws made of anti-magnetic material are permitted for mounting the contact housing. Explore more ABB KNX products for professional building automation projects.

Is the MC-C1.1 safe against vehicle drive-overs?

Yes, the mechanically stable contact housing protects the circuit against damage when rubber-tired vehicles drive over it. For certificates and current technical files, refer to the official product documentation.

What is the degree of protection for this reed contact?

The ABB MC-C1.1 features an IP67 degree of protection.

How is the connection cable protected?

The 4-wire cable is protected by a plastic-coated metal hose.

What is the exact product model?

The order/model code for this page is MC-C1.1. Match it against project documents before purchase.

Who is the manufacturer?

This product is manufactured by ABB.

Conclusion

The ABB MC-C1.1 (2CDG250006R0011) provides a floor-mounted opening detection solution for rolling, sliding, and tilting doors. Featuring IP67 environmental protection, armored 4-wire wiring, and vehicle drive-over tolerance, it offers long-term reliability for commercial entry points. Installers and system integrators can review our installer purchasing support options.