Theben Meteodata 140 S KNX Weather Station

Description

Introduction

The Theben Meteodata 140 S KNX (SKU: 1409207) is a self-contained outdoor weather station engineered for environmental monitoring in automated KNX building networks. Operating on a 110 – 230 V AC power line (50 – 60 Hz) along with KNX bus voltage (≤10 mA), this device delivers tracking of ambient variables required to safeguard and automate external facade systems. This device is part of our KNX system devices range.

Designed for wall installation, the sensor measures wind speed, rain, brightness, and outdoor temperature. It directly drives fully automatic blinds and sun protection systems, adjusting blind positions dynamically according to the trajectory of the sun while operating with a standby consumption of less than 0.5 W.

Key Features

• Self-contained outdoor KNX weather station.
• Measures wind speed, rain, brightness, and temperature.
• Dual power architecture: 110 – 230 V AC (50 – 60 Hz) mains and KNX bus voltage (≤10 mA).
• Wind speed measurement range from 2 to 30 m/s.
• Temperature setting range of -30°C to 60°C and operating ambient range of -20°C to 55°C.
• Wall installation design with IP 44 environmental protection rating.

Benefits

• All-in-One Outdoor Sensing: Measures wind speed, rain, brightness, and temperature within a single self-contained housing.
• Automated Sun Tracking: Supports fully automatic blind and sun protection control aligned with the exact position of the sun.
• Energy-Efficient Operation: Keeps energy overhead low with a standby power consumption under 0.5 W.
• Resilient Design: Rated IP 44 and Class II protection, operating reliably in ambient temperatures from -20°C to 55°C.
• Wide Wind Detection Range: Accurately monitors wind velocity across a 2 to 30 m/s range to protect outdoor shading elements.

Technical Specifications

Specification	Value
Operating voltage	110 – 230 V AC
Frequency	50 – 60 Hz
Operating voltage KNX	Bus voltage, ≤10 mA
Stand-by consumption	<0.5 W
Measuring range wind speed	2 – 30 m/s
Protection class	II
Hand book	PDF
Information Notice EU Data Act	PDF
CE declaration of conformity	PDF
Data sheet	PDF
Installation type	Wall installation
Setting range temperature	-30°C … 60°C
Ambient temperature	-20°C … 55°C
Operating instructions	PDF
Type of protection	IP 44
KNX-Database (Single Product)	ZIP
KNX-Database (all products)	ZIP

Applications

• KNX building automation systems requiring automated control of blinds and sun protection based on real-time solar tracking.
• Outdoor environmental monitoring for commercial and residential buildings to prevent weather damage to exterior shading.

Installation Notes

• Mount the unit outdoors on a surface using the designated wall installation configuration.
• Connect the primary operating voltage of 110 – 230 V AC (50 – 60 Hz) and ensure correct connection to the KNX bus line (≤10 mA).
• Verify that operational conditions remain within the supported ambient temperature range of -20°C to 55°C.

Developer Resources

• KNX Database available in ZIP format for single product and full product lines.
• Official Data Sheet, Operating Instructions, Handbook, and CE Declaration of Conformity in PDF format.

FAQ

What parameters does the Theben Meteodata 140 S KNX measure?

It measures wind speed (2 – 30 m/s), rain, brightness, and temperature in outdoor environments. Explore more theben automation devices for professional building automation projects.

What is the operating voltage required for this weather station?

The device requires an operating voltage of 110 – 230 V AC (50 – 60 Hz) and draws bus power from the KNX line (≤10 mA). For certificates and current technical files, refer to the official theben product page.

What protection class and IP rating does the housing feature?

It features Protection Class II and an IP 44 type of protection designed for wall installation.

How does the station assist with blind control?

It supports fully automatic blind and sun protection control with dynamic position adjustments corresponding to the sun.

What is the exact product model?

The order/model code for this page is 1409207. Match it against project documents before purchase.

Who is the manufacturer?

This product is manufactured by theben.

Conclusion

The Theben Meteodata 140 S KNX (1409207) provides precise environmental monitoring for automated solar protection systems. Combining wind, rain, brightness, and temperature sensing in an IP 44 wall-mounted housing, it delivers accurate real-time data to optimize KNX building automation. Installers and system integrators can review our professional project support options.