Theben HME 6 T KNX 6-Way Heating Actuator Extension Module (4930245)

Description

Introduction

The Theben HME 6 T KNX (SKU: 4930245) is a specialized 6-way heating actuator designed as an extension module for the MIX2 system. Built for KNX building automation applications, this component enables precise control over multiple thermal zones, supporting efficient management of heating and cooling circuits across residential and commercial automation projects. This device is part of our KNX system components range.

Equipped with six individual temperature controllers utilizing P/PI control algorithms, the HME 6 T KNX delivers adaptable thermal regulation. It is engineered for standard DIN rail installation with a 4-module width footprint, featuring low stand-by power consumption of approximately 0.2 W and reliable screw terminal connection points.

Key Features

• 6-way MIX2 heating actuator extension module.
• 6 P/PI temperature controllers for heating and cooling control.
• Triac output rated at 0.45 A.
• Voltage output range of 24 V AC to 240 V AC at 50-60 Hz.
• Non-potential-free switching outputs.
• DIN rail mounting with a width requirement of 4 modules.
• Screw terminal connectivity supporting up to 6 mm² solid wire and 4 mm² stranded wire with sleeve.
• Suitable for SELV operation when all channels switch at SELV level.

Benefits

• Low stand-by power consumption of approximately 0.2 W for efficient energy management.
• Integrated 6 individual P/PI temperature controllers supporting both heating and cooling modes.
• Flexible phase routing with support for switching various electrical phases.
• Modular system integration as a MIX2 series extension module.
• High safety standards with EN 60 669 Protection Class II compliance.

Technical Specifications

Specification	Value
Stand-by consumption	~0.2 W
Number of channels	6
Max. cable cross section	Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Stranded wire with end sleeve: 0.5 mm² to 4 mm²
Output	Triac, 0.45 A
Information Notice EU Data Act	PDF
CE declaration of conformity	PDF
Data sheet	PDF
Width	4
Installation type	DIN rail
Protection class	II according to EN 60 669
Type of connection	Screw terminals
Switching output	Not potential-free
Suitable for SELV	Yes if all channels switch at SELV
Switching of various phases	Possible
Voltage output	24 V AC – 240 V AC
Frequency output	50 – 60 Hz
Ambient temperature	-5°C … 45°C
Operating instructions	PDF
Type of protection	IP 20
Hand book	ZIP

Applications

• Multi-zone temperature control in KNX-controlled residential and commercial buildings.
• Thermal actuator control for heating and cooling circuits.
• MIX2 system expansion for additional 6-channel heating regulation.

Installation Notes

• Mount the 4-module wide device directly onto a standard DIN rail inside an IP 20 protected distribution panel.
• Connect wiring using screw terminals, adhering to maximum cross-section limits of 0.5 mm² to 6 mm² for solid wire and 0.5 mm² to 4 mm² for stranded wire with end sleeves.
• Ensure electrical specifications match the output range of 24 V AC to 240 V AC at 50-60 Hz and confirm non-potential-free output rules.

Developer Resources

• System handbook provided as a ZIP file for advanced technical configuration.
• Official operating instructions PDF and product data sheet PDF.
• CE declaration of conformity PDF and EU Data Act information notice PDF.

FAQ

What is the function of the Theben HME 6 T KNX?

It serves as a 6-way MIX2 heating actuator extension module with 6 integrated P/PI controllers for heating and cooling control. Explore more theben building automation products for professional building automation projects.

What wire sizes can be connected to the terminals?

The screw terminals support solid wires from 0.5 mm² (Ø 0.8) to 6 mm² and stranded wires with end sleeves from 0.5 mm² to 4 mm². For certificates and current technical files, refer to the official theben documentation.

Is this actuator compatible with SELV applications?

Yes, it is suitable for SELV provided that all channels are switched at SELV.

What is the operating temperature range for this device?

The device operates in ambient temperatures ranging from -5°C to 45°C.

What is the exact product model?

The order/model code for this page is 4930245. Match it against project documents before purchase.

Who is the manufacturer?

This product is manufactured by theben.

Conclusion

The Theben HME 6 T KNX (SKU: 4930245) provides a robust and efficient solution for expanding heating and cooling control in KNX installations. With its 6 P/PI controllers, Triac outputs, and compact 4-module DIN rail design, it offers precise climate management for professional building automation setups. Installers and system integrators can review our become a KNX dealer options.