Description
Introduction
The ABB JA/S4.SMI.1M is a KNX actuator in the KNX Actuators category, designed as a 4-fold SMI Shutter Actuator with manual operation in MDRC format. It controls four independent groups in broadcast mode with up to four SMI (Standard Motor Interface) drives (230 V) for positioning blinds, roller shutters, awnings and other shading products.
For consultants, installers, integrators and procurement teams, the JA/S4.SMI.1M provides a clearly identifiable ABB KNX product with Extended Product Type JA/S4.SMI.1M, Product ID 2CDG110028R0011 and EAN 4016779654234. Its product data also lists KNX (TP) as the compatible bus system, IP20 degree of protection, manual operation and front LEDs for output status indication.
Key Features
- Brand: ABB
- SKU / Extended Product Type: JA/S4.SMI.1M
- Product ID: 2CDG110028R0011
- Catalog description: JA/S4.SMI.1M SMI Shutter Actuator, 4-fold, Manual Operation, MDRC
- Number of outputs: 4
- Compatible bus systems: KNX (TP)
- Manual operation: Yes
- Degree of protection: IP20
Benefits
- Controls four independent groups in broadcast mode for SMI-based shading applications.
- Supports positioning of blinds, roller shutters, awnings and other shading products using SMI drives as described in the ABB product data.
- Manual operation is available, with push buttons located on the front of the device for controlling outputs during commissioning.
- Status signals including motor fault and direction of movement can be sent from the SMI drive on the bus.
- LED indication provides a visible display of the current status of the output.
- Clear manufacturer references, including Product ID 2CDG110028R0011 and EAN 4016779654234, support accurate BOQ, submittal and purchasing workflows.
Technical Specifications
Applications
- KNX-based control of blinds using SMI drives.
- Positioning of roller shutters in building automation projects.
- Control of awnings and other shading products where the specified SMI shutter actuator matches the project design.
- Commissioning scenarios where front push buttons are required to control the outputs during setup.
Installation Notes
- Use the official ABB instructions and manuals reference 2CDG941032P0003 when planning, installing and commissioning the JA/S4.SMI.1M.
- Confirm the project requires ABB JA/S4.SMI.1M, Product ID 2CDG110028R0011, before ordering or substituting any actuator in the BOQ.
- The product data lists KNX (TP) as the compatible bus system and auxiliary voltage as 230 V AC; verify these requirements against the official ABB documentation and project drawings.
- The degree of protection is IP20, so enclosure and installation location decisions should be checked against the project requirements and ABB documentation.
- Front push buttons and LED status indication can support commissioning and output checking as described in the product data.
Developer Resources
- Official ABB product page: https://new.abb.com/products/en/2CDG110028R0011/ja-s4-smi-1m
- Instructions and Manuals reference: 2CDG941032P0003
- Declaration of Conformity – CE reference: 2CDK506080D2701
- KNX Certificate reference: 9AKK105710A0050
- KNXbazzar ABB brand page: https://knxbazzar.com/knxshop/?brand=abb
- KNX Actuators category page: https://knxbazzar.com/product-category/knx-actuators/
FAQ
What is the ABB JA/S4.SMI.1M used for?
The ABB JA/S4.SMI.1M controls four independent groups in broadcast mode with up to four SMI drives (230 V) for positioning blinds, roller shutters, awnings and other shading products. Explore more ABB building automation products for professional building automation projects.
Is the JA/S4.SMI.1M a KNX device?
Yes. The product data lists the product range as KNX and the compatible bus system as KNX (TP).
Does the ABB JA/S4.SMI.1M support manual operation?
Yes. Manual operation is listed as available, and the product description states that push buttons are located at the front of the device to control the outputs during commissioning.
How many outputs does the JA/S4.SMI.1M have?
The product data lists the number of outputs as 4.
Which references should be used to verify the exact product?
Use ABB JA/S4.SMI.1M, Product ID 2CDG110028R0011, EAN 4016779654234, Instructions and Manuals reference 2CDG941032P0003 and the official ABB manufacturer URL when verifying the exact model for a BOQ or purchase order.
What is the exact product model?
The order/model code for this page is JA/S4.SMI.1M. Match it against project documents before purchase.
Conclusion
The ABB JA/S4.SMI.1M is a clearly specified KNX (TP) SMI Shutter Actuator for projects requiring 4-fold manual-operation shutter control for blinds, roller shutters, awnings and other shading products. Installers and system integrators can review our installer purchasing support options.
For accurate procurement, match the SKU JA/S4.SMI.1M, Product ID 2CDG110028R0011 and official ABB documentation before confirming the order.
Reviews
There are no reviews yet.