ABB JRA/S12.230.2.2

Description

Introduction

ABB JRA/S12.230.2.2 is a KNX actuator in the KNX Actuators category for controlling independent 230 V AC motors via ABB i-bus® KNX. It is intended for positioning blinds, roller shutters, awnings and other shading products, and for controlling doors, windows and ventilation flaps.

For B2B projects, consultants, installers, integrators and buyers should verify the exact SKU JRA/S12.230.2.2 against the project BOQ, ABB documentation and the manufacturer product page before ordering. The available product data is limited, so selection should be based on the confirmed model reference and the stated application scope only.

Key Features

• Brand: ABB.
• SKU: JRA/S12.230.2.2.
• Category: KNX Actuators.
• Control via ABB i-bus® KNX.
• For independent 230 V AC motors.
• Designed for blinds, roller shutters, awnings and other shading products.
• Applicable to doors, windows and ventilation flaps as stated in the product description.
• Manufacturer reference data includes specification entry V11.0: 27143128.

Benefits

• Supports control of independent 230 V AC motors via ABB i-bus® KNX.
• Designed for common shading applications including blinds, roller shutters, awnings and other shading products.
• Also suitable, according to the product description, for controlling doors, windows and ventilation flaps.
• Additional auxiliary voltage is not needed, simplifying product verification against control-panel requirements where this exact device is specified.
• Electromechanically locked output contacts help protect the motor by preventing opposing output contacts from being active against each other.
• Front push-buttons allow output control during commissioning, supporting on-site setup and verification.
• LED indication displays the current status of the selected output.

Technical Specifications

Specification	Value
V11.0	27143128

Applications

• KNX-based blind, roller shutter and awning positioning in building-automation projects.
• Control of other shading products where the project design calls for independent 230 V AC motor control via ABB i-bus® KNX.
• Door, window and ventilation-flap control applications where ABB JRA/S12.230.2.2 is explicitly specified.
• Commissioning scenarios where front push-button operation and selected-output LED status indication are useful for verifying outputs.

Installation Notes

• Confirm that the project BOQ, panel schedule and purchase request specify ABB JRA/S12.230.2.2 exactly before procurement.
• Use the official ABB product page and current manufacturer documentation for installation, wiring and commissioning instructions.
• Do not substitute this SKU with a similar-looking actuator unless the consultant, integrator or responsible project engineer has approved the exact replacement.
• During commissioning, the front push-buttons can be used to control outputs, and the LED indication can be used to view the current status of the selected output.
• Because the available product data is limited, avoid assuming additional electrical ratings, dimensions, certifications or compatibility beyond the stated ABB i-bus® KNX and 230 V AC motor-control description.

Developer Resources

• Manufacturer product page: https://new.abb.com/products/2CDG110287R0011/jra-s12-230-2-2
• KNXbazzar home: https://knxbazzar.com
• ABB products on KNXbazzar: https://knxbazzar.com/knxshop/?brand=abb
• KNX Actuators category: https://knxbazzar.com/product-category/knx-actuators/
• Dealer enquiry page: https://knxbazzar.com/be-a-dealer/

FAQ

What is ABB JRA/S12.230.2.2 used for?

ABB JRA/S12.230.2.2 is used for controlling independent 230 V AC motors via ABB i-bus® KNX. It is designed for positioning blinds, roller shutters, awnings and other shading products, and for controlling doors, windows and ventilation flaps. Explore more ABB KNX products for professional building automation projects.

Does ABB JRA/S12.230.2.2 require additional auxiliary voltage?

According to the provided product description, additional auxiliary voltage is not needed.

How does the device help protect the motor?

The output contacts are electromechanically locked against each other to help protect the motor.

Can outputs be controlled directly during commissioning?

Yes. Push-buttons are located at the front of the device to control the outputs, for example during commissioning.

How should buyers avoid ordering the wrong product?

Buyers should verify the exact brand and SKU, ABB JRA/S12.230.2.2, against the BOQ, project specification and official ABB documentation before ordering. Do not rely on partial model references or similar product names.

What is the exact product model?

The order/model code for this page is JRA/S12.230.2.2. Match it against project documents before purchase.

Conclusion

ABB JRA/S12.230.2.2 is a KNX actuator for independent 230 V AC motor control via ABB i-bus® KNX, intended for shading products as well as doors, windows and ventilation flaps. Installers and system integrators can review our professional project support options.

Because only limited product data is available, professional buyers should confirm the exact SKU, application fit and official ABB documentation before specifying or purchasing the device.